Hybrid 1100W (600W on Grid + 500W off Grid) MPPT Solar Generator W USB-C
Hybrid 1100W (600W on Grid + 500W off Grid) MPPT Solar Generator W USB-C
How does it work?
- Connect your battery and solar panels (not included). Then plug the battery box into your 110/120V wall outlet. Your work is done here. Everything else is autonomous!
- The hybrid battery box’s first priority is charging your battery. It will only charge until the battery reaches maximum voltage (Typ 13.0V, adjustable).
- Once the battery is full, all extra power will be sent back to the grid.
- The battery charge voltage will be maintained and ready to go.
- If/When you lose the grid connection, the on-grid inverter will be turned off, and the off-grid inverter can be used.
Features:
-
Don’t waste your solar panels with an off-grid system:
- Have power storage for emergencies, camping, tailgating, etc AND have the ability to send power back to the grid when you’re at home.
- Plug and Play, no splicing, crimping, or soldering required.
- Continuous monitoring via Bluetooth app.
- Perfect for on-grid or off-grid use at home, industrial use, commercial use, tailgating, camping, emergency power outages, etc.
- Premium components like 200°C silicone insulated wire, efficient MPPT charge controller, and rugged enclosure.
- Built-in short-circuit protection, open-circuit protection, reverse polarity protection, and over-load protection.
- Assembled in USA with technical support in USA.
Terms used in this listing:
Grid: When we refer to the grid, we are referring to the transmission system for electricity in America. Specifically, residential/commercial 120VAC/1PH/60HZ connections. This product includes a pure sine 48-62HZ grid tie inverter. It may work in other countries such as Canada, Mexico, South America, and Europe, but it has not been tested in these regions.
Gridless Revolution does not make any claims or guarantees regarding power sent back to the grid or a reduced electric bill. Sending power back to the grid is different with every electric provider. In most cases, the relatively small amount of power “sent back” to the grid will in fact be consumed within the same residence, thus, never actually be sent to the grid. Meaning, your electric bill should go down. If you intend to sell power back to your electric provider, you must contact them as there are many rules and regulations and Gridless Revolution cannot be responsible for knowing all the regulations in every jurisdiction.
SpecificationsBattery chemistry compatibility: |
Deep Cycle Lead Acid Flooded Lead Acid Sealed Lead Acid (SLA) Absorbed Glass Mat (AGM) Gel Lithium Lithium Iron Phosphate (LiFePO4) 3S or 7S lithium |
Solar charge controller technology: |
Off-grid inverter: MPPT Grid-tied inverter: MPPT |
Solar panel requirement: Open circuit voltage range (VOC rating on your solar panel label): | 12V version: 15-28V DC |
24V version: 22-60V DC | |
Maximum solar panel input power: (Let us know if you need more solar input capacity) |
40A / 550W @ 12V 40A / 1100W @ 24V |
Solar charge controller power consumption at idle: | 1.0W |
Grid-tied inverter power output: |
600W max continuous Pu |
Hybrid 1100W (600W On Grid + 500W Off Grid) MPPT Solar Generator w USB-C